WEBER. TON LAZUR - varnishcovers for imitation wood structure | 5 kg
Varnish for imitation wood structure
Read more about deliveries...
Guarantee of the lowest !!!
Weber.ton azure is a pre-dyed acrylic stain. The product is a translucent coating, the intensity of the color depends on the way of painting and the number of layers applied. The product is based on a binder based on acrylic resins. The raw materials used in the sicely guarantee a high durability of the finished coating.
The most important features of the sination for imitation weber is:
- satin finish (light gloss)
- resistant to aggressive weather conditions
- faithful devotion to the natural colors of wood and old brick
- ready to use, available in 10 colors
Application WEBER tones Azure:
- Preparation of the substrate:
The substrate should be stable, load-bearing, dry, free of adhesion-reducing contaminants such as dust, cement milk, etc. The substrate should be protected against the possibility of capillary water extraction or moisture for other reasons.
Note! In order to reduce the risk of limestone eruptions, fresh mineral substrates should be primed with weber PG212.
- Product preparation:
Acrylic weber.ton azure is delivered in ready-to-use form, it should only be thoroughly mixed using an electric agitator.
- Executive guidelines:
Apply weber.ton of azure on a dry surface with a thin layer. We recommend painting with a brush, this gives you the opportunity to obtain characteristic streaks imitating natural sipped wood. It is also possible to use a paint roller. Sicege gives a translucent coating, the intensity of the color depends on the way of painting and the amount of layers applied. Apply the second layer 2 - 4 hours after applying the first layer. Excess freshly applied siceling can be collected gently with a sponge or cotton tampon (so-called "puree") thus obtaining the effect of aging.
Wear (depends on the roughness of the substrate):
• single painting - 0.20 kg/m²
• double painting - 0.35 kg/m²